Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”
Give your truck bed a permanent bike-mounting solution with this fork-style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 0.50 lbs. - Dimensions: L 4.00 in x W 1.50 in x H 1.87 in - Limited Lifetime Warranty
Rear wheel strap for Boa bike mount. Includes one strap.
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Pair of EndCaps for Yakima CoreBar.
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry four pairs of powder skis—up to 136mm at the tip—or two snowboards. FatCat EVO mounts tool-free on virtually any roof rack. SKS locks are built in for added security. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries four pair of skis—up to 136 mm wide at the tip—or two snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 10.00 lbs. - Dimensions: L 30.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in
Getting your gear onto your rack isn't complete until you've secured it. This pair of super strong box-stitched 16" straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Step up to the completely new Yakima bar. Thoroughly wind-tunnel tested, the black JetStream's JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. Shopping for a full Yakima Roof Rack System? Use our Fit My Car tool to get outfitted with everything you need for a Base Rack System. - Comes with 2 Crossbars and 4 Endcaps - Wind-tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss internal support engineering adds serious strength for minimal weight - T-slot with SmartFill push-down infill for easy mount attachment and efficient airflow - Clear anodized alloy finish and high-gloss polymer end caps look awesome on your roof - Streamline crossbars are compatible with any StreamLine Tower - Need an adapter? Mighty Mount 39H will let you mount round and square bar accessories on your JetStreams - Find the right bar style and length to fit your needs - Compare four crossbar styles and features to learn more
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.
Yakima's Locking Brackets replace two of the regular mounting brackets that come with your MegaWarrior and LoadWarrior luggage carriers so that you can safely secure these baskets to your crossbars. You get two Locking Brackets, Lock Cores and keys.
The LongArm Height Extension takes your LongArm truck bed extender to the next level. It securely attaches to the LongArm when it's in the vertical position and easily adjusts to match the height of your cab's roof rack. The 165-pound capacity allows for a couple of kayaks or ladders to go up high on your truck, leaving room in your truck bed for other gear, and the included anchor strap tie-downs ensure the load is secure. - Extends your LongArm truck bed extender up to cab height to carry longer loads up to 165 lb - Fully adjustable in height to match your cab's roof rack perfectly - Maintains truck bed space for other gear while still enabling longer loads to be carried such as a fishing kayak, canoe, ladders, lumber and more - Aluminum construction engineered for strength - Durable black powder-coat finish - Included anchor straps secure the LongArm, preventing side to side movement Product Specs: - Weight: 3.00 lbs. - Dimensions: L 2.50 in x W 2.00 in x H 28.25 in - Limited Lifetime Warranty
The versatile, no-drill Outdoorsman lets you create a top-of-vehicle truck rack system for your full-size pickup truck—without the need for a camper shell—while leaving you full access to the truck bed. - Clamps onto truck bed rails without any drilling - The perfect rack solution for everyday hauling of ladders and lumber - Heavy-duty construction handles up to 300 lbs - Sold in pairs; combine single pair with racks on truck roof or combine two pairs for complete system Product Specs: - Weight: 25.00 lbs. - Dimensions: L 16.00 in x W 2.00 in x H 29.00 in - Limited Lifetime Warranty
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
$119.00 - $209.00
The proven Yakima tower for cars with nothing up top, the Q Towers pair with Q Clips to turn a naked roof vehicle into a versatile pile-it-on hauling machine. Durable, simple to install, and super-secure, these work with our RoundBars to get you where you want to go. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Works with the classic Yakima RoundBar - Four-way movement delivers a more solid fit - Padded base aids grip and helps preserve your paint job - Fast and easy tool-free installation and removal - Easily locks to you vehicle with our SKS system (sold separately) Product Specs: - Weight: 3.97 lbs./Pair - Dimensions: L 5.50 in x W 2.50 in x H 5.50 in - Limited Lifetime Warranty
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers. - Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four. - Includes 4 RoundBar end caps Product Specs: - Weight: 0.42 lbs. - Dimensions: L 2.00 in x W 2.00 in x H 1.00 in - Limited Lifetime Warranty
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Page 1 of 11 Next page